In the daily production operation, the maintenance of the packaging machine is one of the important items. In the article “Two-step maintenance of the automatic pillow packing machine”, the electrical part and the lubrication part of the pillow packaging machine are explained in detail. maintenance. For the pillow-type packaging machine, the maintenance of the mechanical part can not be ignored. The three are indispensable, while maintenance can greatly extend the life of the packaging machine.
Mechanical part ★ Under normal circumstances, the new machine has been tested and run by the manufacturer. However, after the user is turned on, it should run at medium speed (about 40 bags/min) for 24 hours and then run at high speed to facilitate the use of machinery. Longer life.
★After the packaging machine is operating for one month, the precise operator who guarantees the packaging effect shall adjust the drive chain and transmission belt. After every two months of operation, it shall be adjusted;
★ The lubrication of the components of the packaging machine is an important part, so horizontally sealing the main driven gear should be filled with grease once every two months of operation.
★ The internal sanitation of the machine is one of the factors that guarantees the packaging effect. Therefore, the inside of the vertical cover plate should be cleaned twice a week, and at the same time, the vertical sealing slide should be lubricated.
★ The adjustment of the packing machine's operation speed should be concerned with the adjustment of the gearbox. The tooth chain tension adjustment of the toothed chain continuously variable transmission and the use of it are described in the instruction manual of the continuously variable transmission.
★ Daily mechanical failures are usually the cause of loose parts or loose parts. In order to ensure the normal operation of the packaging machine, the operator should regularly check the looseness of the fastening parts, lubricate the gears, racks, sprockets, chains, and screw rods. ;
★ In order to keep the whole machine clean, you should often clean, wipe the outer surface of the machine cover, work surface, etc. to keep the machine clean.
